dmesg - tets memoria
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-45-generic (buildd@roseapple) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5.1) ) #102-Ubuntu SMP Wed Jan 2 21:53:06 UTC 2013 (Ubuntu 2.6.32-45.102-generic 2.6.32.60+drm33.26)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000badef000 (usable)
BIOS-e820: 00000000badef000 - 00000000bae74000 (ACPI NVS)
BIOS-e820: 00000000bae74000 - 00000000bae76000 (reserved)
BIOS-e820: 00000000bae76000 - 00000000bae86000 (ACPI NVS)
BIOS-e820: 00000000bae86000 - 00000000bae97000 (reserved)
BIOS-e820: 00000000bae97000 - 00000000baead000 (ACPI NVS)
BIOS-e820: 00000000baead000 - 00000000baed6000 (reserved)
BIOS-e820: 00000000baed6000 - 00000000baee7000 (ACPI NVS)
BIOS-e820: 00000000baee7000 - 00000000baeea000 (reserved)
BIOS-e820: 00000000baeea000 - 00000000baeeb000 (ACPI NVS)
BIOS-e820: 00000000baeeb000 - 00000000baefd000 (reserved)
BIOS-e820: 00000000baefd000 - 00000000baf00000 (ACPI NVS)
BIOS-e820: 00000000baf00000 - 00000000baf04000 (reserved)
BIOS-e820: 00000000baf04000 - 00000000baf05000 (ACPI NVS)
BIOS-e820: 00000000baf05000 - 00000000baf09000 (reserved)
BIOS-e820: 00000000baf09000 - 00000000baf0c000 (ACPI data)
BIOS-e820: 00000000baf0c000 - 00000000baf11000 (reserved)
BIOS-e820: 00000000baf11000 - 00000000baf20000 (ACPI NVS)
BIOS-e820: 00000000baf20000 - 00000000bc000000 (reserved)
BIOS-e820: 00000000bde00000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000138000000 (usable)
DMI 2.6 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0xbadef max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0BC000000 mask FFC000000 uncachable
3 base 100000000 mask FC0000000 write-back
4 base 138000000 mask FF8000000 uncachable
5 base 0FFE00000 mask FFFE00000 write-protect
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009bc00 (usable)
modified: 000000000009bc00 - 00000000000a0000 (reserved)
modified: 00000000000e0000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 00000000badef000 (usable)
modified: 00000000badef000 - 00000000bae74000 (ACPI NVS)
modified: 00000000bae74000 - 00000000bae76000 (reserved)
modified: 00000000bae76000 - 00000000bae86000 (ACPI NVS)
modified: 00000000bae86000 - 00000000bae97000 (reserved)
modified: 00000000bae97000 - 00000000baead000 (ACPI NVS)
modified: 00000000baead000 - 00000000baed6000 (reserved)
modified: 00000000baed6000 - 00000000baee7000 (ACPI NVS)
modified: 00000000baee7000 - 00000000baeea000 (reserved)
modified: 00000000baeea000 - 00000000baeeb000 (ACPI NVS)
modified: 00000000baeeb000 - 00000000baefd000 (reserved)
modified: 00000000baefd000 - 00000000baf00000 (ACPI NVS)
modified: 00000000baf00000 - 00000000baf04000 (reserved)
modified: 00000000baf04000 - 00000000baf05000 (ACPI NVS)
modified: 00000000baf05000 - 00000000baf09000 (reserved)
modified: 00000000baf09000 - 00000000baf0c000 (ACPI data)
modified: 00000000baf0c000 - 00000000baf11000 (reserved)
modified: 00000000baf11000 - 00000000baf20000 (ACPI NVS)
modified: 00000000baf20000 - 00000000bc000000 (reserved)
modified: 00000000bde00000 - 00000000c0000000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fec01000 (reserved)
modified: 00000000fed10000 - 00000000fed14000 (reserved)
modified: 00000000fed18000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed20000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffa00000 - 00000000ffc00000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
modified: 0000000100000000 - 0000000138000000 (usable)
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000377fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 3784b000 - 37fefde6
Allocated new RAMDISK: 008ea000 - 0108ede6
Move RAMDISK from 000000003784b000 - 0000000037fefde5 to 008ea000 - 0108ede5
ACPI: RSDP 000f0410 00024 (v02 _ASUS_)
ACPI: XSDT baf0ae18 0005C (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
ACPI: FACP baeeac18 000F4 (v04 _ASUS_ _ASUS_ 06222004 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - BAF1CF40/00000000BAF1FD40, using 32 (20090903/tbfadt-486)
ACPI: DSDT bae9f018 0D800 (v01 _ASUS_ _ASUS_ 00000000 INTL 20051117)
ACPI: FACS baf1cf40 00040
ACPI: APIC baf09f18 0008C (v02 _ASUS_ _ASUS_ 06222004 MSFT 00010013)
ACPI: MCFG baf1ed18 0003C (v01 _ASUS_ _ASUS_ 06222004 MSFT 00000097)
ACPI: HPET baf1ec98 00038 (v01 _ASUS_ _ASUS_ 06222004 AMI. 00000003)
ACPI: ECDT baf1fb18 000C1 (v01 _ASUS_ _ASUS_ 06222004 AMI 00000000)
ACPI: SLIC baf17a18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
ACPI: SSDT baf04018 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
2101MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00008e5ef8] TEXT DATA BSS ==> [0000100000 - 00008e5ef8]
#4 [000009bc00 - 0000100000] BIOS reserved ==> [000009bc00 - 0000100000]
#5 [00008e6000 - 00008e91c9] BRK ==> [00008e6000 - 00008e91c9]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [00008ea000 - 000108ede6] NEW RAMDISK ==> [00008ea000 - 000108ede6]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00fcae0] fcae0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x000badef
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009b
0: 0x00000100 -> 0x000badef
On node 0 totalpages: 765306
free_area_init_node: node 0, pgdat c07a0800, node_mem_map c1090200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3947 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 4204 pages used for memmap
HighMem zone: 533893 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at c0000000 (gap: c0000000:38000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288 u524288
pcpu-alloc: s36056 r0 d21288 u524288 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 759326
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 15308140 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000377fe:000badef)
Memory: 3003636k/3061692k available (4702k kernel code, 56152k reserved, 2124k data, 664k init, 2152388k highmem)
virtual kernel memory layout:
fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc07ab000 - 0xc0851000 ( 664 kB)
.data : 0xc0597a27 - 0xc07aadc8 (2124 kB)
.text : 0xc0100000 - 0xc0597a27 (4702 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304 nr_irqs:472
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2260.979 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.95 BogoMIPS (lpj=9043916)
Security Framework initialized
AppArmor: AppArmor initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6
using mwait in idle threads.
Performance Events: Westmere events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21849 entries in 43 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
CPU0: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
Booting processor 1 APIC 0x4 ip 0x6000
Initializing CPU#1
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU1: Thermal monitoring enabled (TM1)
CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6
CPU1: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2 APIC 0x1 ip 0x6000
Initializing CPU#2
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU2: Thermal monitoring enabled (TM1)
CPU 2 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
CPU2: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3 APIC 0x5 ip 0x6000
Initializing CPU#3
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 3072K
CPU3: Thermal monitoring enabled (TM1)
CPU 3 MCA banks SHD:2 SHD:3 SHD:5 SHD:6
CPU3: Intel(R) Core(TM) i5 CPU M 430 @ 2.27GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (18087.67 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
devtmpfs: initialized
regulator: core version 0.5
Time: 22:23:41 Date: 02/14/13
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
EISA bus registered
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10 64bit mmio: [0xe3400000-0xe37fffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 20 io port: [0xe080-0xe087]
pci 0000:00:16.0: reg 10 64bit mmio: [0xeb00a000-0xeb00a00f]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 10 32bit mmio: [0xeb008000-0xeb0083ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xeb000000-0xeb003fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 10 32bit mmio: [0xeb007000-0xeb0073ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.2: reg 10 io port: [0xe070-0xe077]
pci 0000:00:1f.2: reg 14 io port: [0xe060-0xe063]
pci 0000:00:1f.2: reg 18 io port: [0xe050-0xe057]
pci 0000:00:1f.2: reg 1c io port: [0xe040-0xe043]
pci 0000:00:1f.2: reg 20 io port: [0xe020-0xe03f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xeb006000-0xeb0067ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 64bit mmio: [0xeb005000-0xeb0050ff]
pci 0000:00:1f.3: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1f.6: reg 10 64bit mmio: [0xeb004000-0xeb004fff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:01:00.0: reg 1c 64bit mmio pref: [0xe0000000-0xe1ffffff]
pci 0000:01:00.0: reg 24 io port: [0xd000-0xd07f]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0xe3000000-0xe307ffff]
pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xe30fffff]
pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xe9c00000-0xeaffffff]
pci 0000:03:00.0: reg 10 64bit mmio: [0xe8800000-0xe880ffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xe8800000-0xe9bfffff]
pci 0000:00:1c.2: bridge io port: [0xa000-0xafff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xe7400000-0xe87fffff]
pci 0000:06:00.0: reg 10 64bit mmio: [0xe6000000-0xe6001fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0x9000-0x9fff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xe6000000-0xe73fffff]
pci 0000:00:1c.4: bridge io port: [0x8000-0x8fff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xe4c00000-0xe5ffffff]
pci 0000:08:00.0: reg 10 64bit mmio: [0xe3800000-0xe383ffff]
pci 0000:08:00.0: reg 18 io port: [0x7000-0x707f]
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0x7000-0x7fff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xe3800000-0xe4bfffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
ACPI: PCI Root Bridge [CPBG] (0000:3f)
pci_bus 0000:3f: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: WMI: Mapper loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:05: ioport range 0x680-0x69f has been reserved
system 00:05: ioport range 0xff00-0xff0f has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0xffff-0xffff has been reserved
system 00:05: ioport range 0x400-0x47f has been reserved
system 00:05: ioport range 0x500-0x57f has been reserved
system 00:05: ioport range 0x164e-0x164f has been reserved
system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved
system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved
system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved
system 00:09: iomem range 0xf8000000-0xfbffffff has been reserved
system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:09: iomem range 0xff000000-0xffffffff could not be reserved
system 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
system 00:09: iomem range 0xf7fff000-0xf7ffffff has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xd0000000-0xe30fffff
pci 0000:00:01.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0xc000-0xcfff
pci 0000:00:1c.0: MEM window: 0xe9c00000-0xeaffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000e3100000-0x000000e32fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0xb000-0xbfff
pci 0000:00:1c.1: MEM window: 0xe8800000-0xe9bfffff
pci 0000:00:1c.1: PREFETCH window: 0x000000eb100000-0x000000eb2fffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2: IO window: 0xa000-0xafff
pci 0000:00:1c.2: MEM window: 0xe7400000-0xe87fffff
pci 0000:00:1c.2: PREFETCH window: 0x000000eb300000-0x000000eb4fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
pci 0000:00:1c.3: IO window: 0x9000-0x9fff
pci 0000:00:1c.3: MEM window: 0xe6000000-0xe73fffff
pci 0000:00:1c.3: PREFETCH window: 0x000000eb500000-0x000000eb6fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07
pci 0000:00:1c.4: IO window: 0x8000-0x8fff
pci 0000:00:1c.4: MEM window: 0xe4c00000-0xe5ffffff
pci 0000:00:1c.4: PREFETCH window: 0x000000eb700000-0x000000eb8fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
pci 0000:00:1c.5: IO window: 0x7000-0x7fff
pci 0000:00:1c.5: MEM window: 0xe3800000-0xe4bfffff
pci 0000:00:1c.5: PREFETCH window: 0x000000eb900000-0x000000ebafffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:01: resource 1 mem: [0xd0000000-0xe30fffff]
pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:02: resource 1 mem: [0xe9c00000-0xeaffffff]
pci_bus 0000:02: resource 2 pref mem [0xe3100000-0xe32fffff]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xe8800000-0xe9bfffff]
pci_bus 0000:03: resource 2 pref mem [0xeb100000-0xeb2fffff]
pci_bus 0000:04: resource 0 io: [0xa000-0xafff]
pci_bus 0000:04: resource 1 mem: [0xe7400000-0xe87fffff]
pci_bus 0000:04: resource 2 pref mem [0xeb300000-0xeb4fffff]
pci_bus 0000:06: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:06: resource 1 mem: [0xe6000000-0xe73fffff]
pci_bus 0000:06: resource 2 pref mem [0xeb500000-0xeb6fffff]
pci_bus 0000:07: resource 0 io: [0x8000-0x8fff]
pci_bus 0000:07: resource 1 mem: [0xe4c00000-0xe5ffffff]
pci_bus 0000:07: resource 2 pref mem [0xeb700000-0xeb8fffff]
pci_bus 0000:08: resource 0 io: [0x7000-0x7fff]
pci_bus 0000:08: resource 1 mem: [0xe3800000-0xe4bfffff]
pci_bus 0000:08: resource 2 pref mem [0xeb900000-0xebafffff]
pci_bus 0000:09: resource 3 io: [0x00-0xffff]
pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:3f: resource 0 io: [0x00-0xffff]
pci_bus 0000:3f: resource 1 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1a.0: PCI INT A disabled
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci 0000:06:00.0: PCI INT A disabled
cpufreq-nforce2: No nForce2 chipset.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1360880621.000:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.13)
msgmni has been set to 1665
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 27 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 28 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 29 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 29 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 30 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 30 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3b42 ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 3b44 ss_vid 0 ss_did 0
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 3b46 ss_vid 0 ss_did 0
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 3b48 ss_vid 0 ss_did 0
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3b4a ss_vid 0 ss_did 0
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 3b4c ss_vid 0 ss_did 0
pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: SSDT baf08c18 003B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT baf06618 005CD (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT baf07a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT baf05d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
processor LNXCPU:01: registered as cooling_device1
processor LNXCPU:02: registered as cooling_device2
processor LNXCPU:03: registered as cooling_device3
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (38 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input4
Fixed MDIO Bus: probed
PPP generic driver version 2.4.2
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xeb008000
Freeing initrd memory: 7827k freed
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xeb007000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.1.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 7
Cannot allocate resource for EISA slot 8
EISA: Detected 0 cards.
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 1:185:401
rtc_cmos 00:06: setting system clock to 2013-02-14 22:23:41 UTC (1360880621)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
usb 1-1: new high speed USB device using ehci_hcd and address 2
isapnp: No Plug & Play device found
Freeing unused kernel memory: 664k freed
Write protecting the kernel text: 4704k
Write protecting the kernel read-only data: 1848k
udev: starting version 151
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
alloc irq_desc for 31 on node -1
alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 31 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xeb006000 port 0xeb006100 irq 31
ata2: SATA max UDMA/133 abar m2048@0xeb006000 port 0xeb006180 irq 31
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xeb006000 port 0xeb006300 irq 31
ata6: SATA max UDMA/133 abar m2048@0xeb006000 port 0xeb006380 irq 31
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
usb 1-1.2: new high speed USB device using ehci_hcd and address 3
ata1.00: ATA-8: ST9500325AS, 0002SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0002 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8
usb 1-1.2: configuration #1 chosen from 1 choice
sda9 > sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-STDVDRAM GT30N, AS02, max UDMA/100
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N AS02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 62x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
EXT4-fs (sda6): mounted filesystem with ordered data mode
udev: starting version 151
lp: driver loaded but no devices found
Adding 3905528k swap on /dev/sda8. Priority:-1 extents:1 across:3905528k
Linux agpgart interface v0.103
cfg80211: Calling CRDA to update world regulatory domain
agpgart-intel 0000:00:00.0: Intel IGDNG/M Chipset
agpgart-intel 0000:00:00.0: detected 32764K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
atl1c 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
atl1c 0000:08:00.0: setting latency timer to 64
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
asus_laptop: Asus Laptop Support version 0.42
xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:06:00.0: setting latency timer to 64
xhci_hcd 0000:06:00.0: xHCI Host Controller
xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: irq 19, io mem 0xe6000000
asus_laptop: N61Jv model detected
input: Asus Laptop extra buttons as /devices/virtual/input/input6
usb usb3: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb3: configuration #1 chosen from 1 choice
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
asus_laptop: Brightness ignored, must be controlled by ACPI video driver
[drm] Initialized drm 1.1.0 20060810
type=1505 audit(1360877034.970:2): operation="profile_load" pid=763 name="/sbin/dhclient3"
type=1505 audit(1360877034.970:3): operation="profile_load" pid=763 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1360877034.970:4): operation="profile_load" pid=763 name="/usr/lib/connman/scripts/dhclient-script"
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 32 on node -1
alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 32 for MSI/MSI-X
[drm] set up 31M of stolen space
atl1c 0000:08:00.0: version 1.0.0.1-NAPI
ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath9k 0000:03:00.0: setting latency timer to 64
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (13d3:5122)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
nouveau 0000:01:00.0: power state changed by ACPI to D0
nouveau 0000:01:00.0: power state changed by ACPI to D0
nouveau 0000:01:00.0: enabling device (0000 -> 0003)
nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nouveau 0000:01:00.0: setting latency timer to 64
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
[drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a5a80a2)
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[drm] nouveau 0000:01:00.0: ... BIOS signature not found
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[drm] nouveau 0000:01:00.0: ... BIOS signature not found
[drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
nouveau 0000:01:00.0: Invalid ROM contents
[drm] nouveau 0000:01:00.0: ... BIOS signature not found
[drm] nouveau 0000:01:00.0: No valid BIOS image found
nouveau 0000:01:00.0: PCI INT A disabled
vga16fb: initializing
vga16fb: mapped to 0xc00a0000
fb0: VGA16 VGA frame buffer device
phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8fc0000, irq=17
psmouse serio4: ID: 10 00 64
elantech.c: assuming hardware version 2, firmware version 4.2.1
Console: switching to colour frame buffer device 80x30
elantech.c: Synaptics capabilities query result 0x78, 0x14, 0x0b.
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input8
fb1: inteldrmfb frame buffer device
registered panic notifier
ACPI Warning: _BQC returned an invalid level (20090903/video-631)
acpi device:18: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:15/LNXVIDEO:00/input/input9
ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
------------[ cut here ]------------
WARNING: at /build/buildd/linux-2.6.32/fs/proc/generic.c:590 proc_register+0x103/0x1e0()
Hardware name: N61Jv
proc_dir_entry 'video/GFX0' already registered
Modules linked in: joydev snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm fbcon arc4 snd_seq_dummy tileblit font bitblit softcursor snd_seq_oss vga16fb vgastate snd_seq_midi snd_rawmidi snd_seq_midi_event nouveau snd_seq uvcvideo videodev snd_timer snd_seq_device ath9k ttm v4l1_compat i915(+) drm_kms_helper snd mac80211 ath drm xhci video asus_laptop soundcore output snd_page_alloc atl1c psmouse serio_raw intel_agp agpgart cfg80211 i2c_algo_bit led_class lp parport ahci
Pid: 522, comm: modprobe Not tainted 2.6.32-45-generic #102-Ubuntu
Call Trace:
[] warn_slowpath_common+0x72/0xa0
[] ? proc_register+0x103/0x1e0
[] ? proc_register+0x103/0x1e0
[] warn_slowpath_fmt+0x2b/0x30
[] proc_register+0x103/0x1e0
[] proc_mkdir_mode+0x38/0x60
[] proc_mkdir+0x14/0x20
[] acpi_video_bus_add_fs+0x27/0x154 [video]
[] acpi_video_bus_add+0x112/0x2d0 [video]
[] ? sysfs_do_create_link+0xaa/0x130
[] acpi_device_probe+0x3f/0xf9
[] really_probe+0x4d/0x140
[] ? pm_runtime_barrier+0x4e/0xc0
[] driver_probe_device+0x3c/0x60
[] __driver_attach+0x81/0x90
[] bus_for_each_dev+0x53/0x80
[] driver_attach+0x1e/0x20
[] ? __driver_attach+0x0/0x90
[] bus_add_driver+0xd5/0x280
[] ? acpi_device_remove+0x0/0x95
[] driver_register+0x6a/0x130
[] ? proc_mkdir_mode+0x38/0x60
[] acpi_bus_register_driver+0x3f/0x41
[] acpi_video_register+0x3d/0x66 [video]
[] intel_opregion_init+0x159/0x2c0 [i915]
[] i915_driver_load+0x383/0x6f0 [i915]
[] ? drm_get_minor+0x12f/0x1d0 [drm]
[] drm_get_dev+0x125/0x230 [drm]
[] ? sysfs_addrm_start+0x60/0xa0
[] i915_pci_probe+0x12/0x15b [i915]
[] local_pci_probe+0x13/0x20
[] pci_device_probe+0x68/0x90
[] really_probe+0x4d/0x140
[] ? pm_runtime_barrier+0x4e/0xc0
[] driver_probe_device+0x3c/0x60
[] __driver_attach+0x81/0x90
[] bus_for_each_dev+0x53/0x80
[] driver_attach+0x1e/0x20
[] ? __driver_attach+0x0/0x90
[] bus_add_driver+0xd5/0x280
[] ? pci_device_remove+0x0/0x40
[] driver_register+0x6a/0x130
[] ? klist_next+0x6b/0xc0
[] __pci_register_driver+0x45/0xb0
[] drm_init+0xf3/0x100 [drm]
[] i915_init+0x9f/0xa1 [i915]
[] ? __blocking_notifier_call_chain+0x54/0x70
[] do_one_initcall+0x31/0x190
[] ? i915_init+0x0/0xa1 [i915]
[] sys_init_module+0xb0/0x210
[] syscall_call+0x7/0xb
[] ? cpufreq_cpu_callback+0x59/0x6a
---[ end trace 020e02dd73c46cd4 ]---
ACPI Warning: _BQC returned an invalid level (20090903/video-631)
acpi device:1a: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
alloc irq_desc for 22 on node -1
alloc kstat_irqs on node -1
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC269: BIOS auto-probing.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
EXT4-fs (sda7): mounted filesystem with ordered data mode
type=1505 audit(1360877038.466:5): operation="profile_load" pid=1099 name="/usr/share/gdm/guest-session/Xsession"
type=1505 audit(1360877038.466:6): operation="profile_replace" pid=1100 name="/sbin/dhclient3"
type=1505 audit(1360877038.466:7): operation="profile_replace" pid=1100 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
type=1505 audit(1360877038.466:8): operation="profile_replace" pid=1100 name="/usr/lib/connman/scripts/dhclient-script"
type=1505 audit(1360877038.466:9): operation="profile_load" pid=1105 name="/usr/sbin/tcpdump"
type=1505 audit(1360877038.466:10): operation="profile_load" pid=1104 name="/usr/lib/cups/backend/cups-pdf"
type=1505 audit(1360877038.466:11): operation="profile_load" pid=1101 name="/usr/bin/evince"
ADDRCONF(NETDEV_UP): wlan0: link is not ready
alloc irq_desc for 33 on node -1
alloc kstat_irqs on node -1
atl1c 0000:08:00.0: irq 33 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x586 offMax=0x129b
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
vboxpci: IOMMU not found (not compiled)
ppdev: user-space parallel port driver
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU2 attaching NULL sched-domain.
CPU3 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
CPU2 attaching sched-domain:
domain 0: span 0,2 level SIBLING
groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
CPU3 attaching sched-domain:
domain 0: span 1,3 level SIBLING
groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-3 level MC
groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
wlan0: deauthenticating from 00:1e:e5:f3:ea:bc by local choice (reason=3)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 2)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 2)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: no IPv6 routers present
wlan0: deauthenticating from 00:1e:e5:f3:ea:bc by local choice (reason=3)
usb 3-3: new full speed USB device using xhci_hcd and address 0
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: Stalled endpoint
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
usb 3-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1c.3/0000:06:00.0/usb3/3-3/3-3:1.0/input/input12
generic-usb 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:06:00.0-3/input0
input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1c.3/0000:06:00.0/usb3/3-3/3-3:1.1/input/input13
generic-usb 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:06:00.0-3/input1
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
xhci_hcd 0000:06:00.0: WARN: short transfer on control ep
input: Microsoft Microsoft® Nano Transceiver v2.0 as /devices/pci0000:00/0000:00:1c.3/0000:06:00.0/usb3/3-3/3-3:1.2/input/input14
generic-usb 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® Nano Transceiver v2.0] on usb-0000:06:00.0-3/input2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ath9k: Two wiphys trying to scan at the same time
wlan0: deauthenticating from 00:1e:e5:f3:ea:bc by local choice (reason=3)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 2)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 2)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
ath9k: Failed to stop TX DMA in 100 msec after killing last frame
ath9k: Failed to stop TX DMA in 100 msec after killing last frame
ath9k: Unable to stop TxDMA. Reset HAL!
ath9k: Failed to stop TX DMA in 100 msec after killing last frame
ath9k: Unable to stop TxDMA. Reset HAL!
ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020
ath9k: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x00000020
ath9k: Failed to stop TX DMA in 100 msec after killing last frame
ath9k: Failed to stop TX DMA in 100 msec after killing last frame
ath9k: Unable to stop TxDMA. Reset HAL!
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated
ath9k: Failed to stop TX DMA in 100 msec after killing last frame
ath9k: Unable to stop TxDMA. Reset HAL!
wlan0: deauthenticated from 00:1e:e5:f3:ea:bc (Reason: 7)
wlan0: direct probe to AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: authenticated
wlan0: associate with AP 00:1e:e5:f3:ea:bc (try 1)
wlan0: RX AssocResp from 00:1e:e5:f3:ea:bc (capab=0x401 status=0 aid=10)
wlan0: associated